KEWTECH Two Pole Voltage and Continuity Tester (KT1795)

This Two Pole Voltage and continuity tester from KEWTECH, is supplied with an LCD readout and ghost voltage clearance feature.

It is an essential tool for every electrician to have in there toolbox, as it can be used for voltage indication and for the safe isolation of live circuits.

The KT1795 will indicate voltage is present even with no batteries or if the batteries go flat so you can have piece of mind of indication when working with live circuits.

The KT1795 has bright LEDs to show the voltage steps as well as featuring an LCD display which provides you with an exact voltage readout to a 1V resolution.

Key Benefits

Required for correct safe isolation procedure

Ghost voltage clearance function

Permanent UK Specific GS38 Slender probe tips NO NEED to swap ends

Fits into recessed terminals such as RCBOs without unscrewing any caps

IP64

Designed to the new international safety standards IEC 61243-3 & IEC 61010-1

Cat IV 600V, Cat III 1000V

Key Features

AC voltage range 6V - 1000V

DC voltage range 6V - 1500V

Single pole voltage detection on both probes

Phase rotation - Bright green LEDs show left or right rotation

Push buttons to increase the testing load to clear ghost voltages

1V LCD resolution display

Bright LEDs indicate voltage level

Clear audible tone

Bright torch light - gives ample illumination

Continuity Test

Diode test

Self diagnostic test

Polarity indication

Auto power on/off

Data hold